This hinge is available in several beautiful finishes*. CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs. Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
These hinges are designed for residential or hotel shower use only. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.
* Other finishes available on request
General | |
Glass Thickness | 10mm and 12mm Toughened Safety Glass |
Glass Reduction | 6mm |
Construction | Solid Brass |
Cover Plates/Caps | Not Included |
Includes | Gaskets, Screws, and Glass Fabrication Dimensions |
Hinge Type | |
Hinge Swing | 90° In / 90° Out |
Closing Type | Self-centering when within 15° of closed position. |
Use of Gaskets | For 10mm Glass: Use one thick gasket on each side. For 12mm Glass: Use one thin gasket on each side. |
Adjustable | No |
Cutouts Required | Yes |
Recommendations | Use only tempered safety glass. Do not exceed either maximum weight or width when choosing proper quantity of hinges. Do not use power tools when installing these hinges. |
Door Capacities | |
Use with 2 Hinges | For 10 and 12 mm glass the hinge will hold up to 50 kg with a maximum door width of 914 mm. |
Use with 3 Hinges | For 10 and 12 mm glass the hinge will hold up to 63 kg with a maximum door width of 914 mm. |
Vienna 092 Hinge (90 degree)
- Category: Shower Hardware
- Model: Glass-to-Glass
- V1E092
- Availability:In Stock
-
£65.00