Can you cut toughened glass to any size?

Glass can be manufactured to a wide range of bespoke dimensions, subject to the available glass type, thickness, manufacturing and transport limitations. Enter your measurements where supported or contact us for unusual or large requirements.

Can you make toughened glass in any shape?

Many custom shapes can be manufactured, including rectangles, squares, circles, radius corners and more complex profiles where suitable. A drawing or template may be required for unusual shapes.

Can holes and cut-outs be added to toughened glass?

Yes, where the selected glass and design allow it. Holes, notches and other fabrication details must be completed before the glass is toughened.

Can toughened glass be cut after it has been made?

No. Toughened glass must be cut, shaped, drilled and edge-finished before the toughening process. Once toughened, it cannot safely be altered.

What is toughened glass used for?

Made-to-measure toughened glass is used for table tops, shelves, furniture protection, splashbacks, doors and panels, garden furniture, cabinets, screens and many other domestic and commercial applications, subject to the correct specification.

Is toughened glass stronger than normal glass?

Thermally toughened glass is significantly stronger than annealed glass of the same thickness and has improved resistance to thermal stress. If it breaks, it is designed to fracture into smaller granular pieces.

What thickness of toughened glass should I choose?

The correct thickness depends on the application, dimensions, support, span, fixing method and expected loads. Do not choose thickness from size alone; ask for advice if the specification is structural or safety-critical.

Can back painted glass be matched to RAL, Farrow & Ball or Dulux colours?

Yes. We can match back painted glass to RAL, Farrow & Ball and Dulux paint colours, and we also offer a colour matching service for specific colours or samples. Contact us to discuss the colour you need.

Can you colour match a paint sample for back painted glass?

Yes. We offer a colour matching service for customers who have a particular paint colour, sample or colour reference. Contact us before ordering so we can discuss the required finish and matching process.

What is the difference between toughened and laminated safety glass?

They are different safety-glass products. Toughened glass is heat-treated and designed to break into smaller granular pieces, while laminated glass uses layers bonded together so the glass tends to remain held together when broken. The appropriate type depends on the application.

Painted Toughened

Why choose toughened glass?

Improved Strength

Thermally toughened glass is processed to make it substantially stronger than annealed glass of the same thickness and more resistant to thermal stress.

Safety Characteristics

If toughened glass breaks, it is designed to fracture into smaller granular pieces rather than long, sharp shards. This is one reason it is widely used for suitable furniture, interior and architectural applications.

Made for the Application

Toughened glass is not automatically suitable for every project. The glass type, thickness, support and installation need to be appropriate for the intended use.

What thickness do I need?

Thickness should be selected according to the application rather than simply choosing the thickest available glass. The size of the panel, span, support, fixing method, expected load and environmental conditions can all affect the specification.

Application	Key Considerations	Specification Approach
Furniture protector	Usually supported continuously by the surface underneath.	A suitable thinner option may be appropriate depending on size and use.
Tabletop or breakfast bar	Panel dimensions, support and everyday impact.	Choose a suitable toughened thickness for the complete furniture design.
Shelf or cabinet panel	Span, depth, bracket spacing and load.	Thickness and support should be considered together.
Door, screen or architectural panel	Fixing system, dimensions, impact risk and relevant requirements.	Use the specification appropriate to the complete glazing system; ask for advice where necessary.

For safety-critical, structural or architectural applications, the glass specification must be checked against the complete installation and any applicable requirements. Contact us if you are unsure which thickness or glass type is suitable.

Where is toughened glass commonly used?

Glass Table Tops

Protect existing furniture or create a new tabletop from a custom-cut sheet. Choose clear, low iron, satin or tinted options where available.

Glass Shelves

Order shelves to fit alcoves, cabinets, bathrooms, kitchens, display units and other spaces where standard sizes do not work.

Furniture Glass

Replace damaged panels or add protective glass to desks, sideboards, cabinets, coffee tables and bespoke furniture.

Kitchen & Splashback Glass

Made-to-measure toughened glass can be specified for suitable kitchen applications where accurate dimensions and heat resistance matter.

Doors & Panels

Replacement or bespoke glass panels can be made to suit compatible doors, screens, cabinets and interior frames.

Garden & Outdoor Glass

Custom glass can be used for suitable outdoor furniture and architectural applications, provided the glass type, support and fixing system are correctly specified.

From Same Category

Quickview

Black Toughened

£0.00

Ex Tax:£0.00